Common Mistake Areas When Using Hose Reels

0
18

Hose reels come in a wide range of designs, brands, and styles. Most of the time, the various styles are applied for different purposes. For instance, garden hose reels are used for gardening, while pressure washer hose reels are used in firefighting. Regardless, the storage function of the hose reel remains constant. In this post, we look at the mistakes made when using hose reel.

Common mistake areas when using a hose and hose reel

Using a hose reel may seem very easy. However, you may be surprised that a lot of people make mistakes during the process. Below are some mistake areas you should be looking out for when using a hose reel;

1. Unwinding

If your hose reel is correctly installed and the hose is attached perfectly to it, then the unwinding process should be straightforward. However, this is not always the case. Many people make mistakes like pulling on the water hose too much or applying a lot of pressure on the mechanisms or attachments. Other people also make the mistake of pulling the entire length of the hose.

What is the correct way to unwind the hose reel?

The trick to correctly unwinding a water hose from the hose reel is to avoid using too much pressure. It would also be wise to ensure that you only pull the length of the water hose you need for a particular application. If the hose length is inadequate, instead of pulling the entire length and straining the hose, it would be wise to look for another alternative.

Why is unwinding important?

Improper unwinding can result in the hose breaking from the hose reel. It can also apply pressure on the hose reel, impacting its installation.

2. Winding

One of the most popular mistakes people make when using the hose reels is in the winding process. Firstly, many people do not drain out all the water from the hose before coiling it to the hose reel. Additionally, you would think that putting the hose back on the reel would be the easiest thing to do. However, a lot of people do not do it in the right way.

What is the correct way to do it?

The first thing you should do is ensure that there is no more water inside the water hose. Afterward, you can either manually wind the hose on the reel or use the automatic retraction system. When doing this, ensure that you do not hurry the process and ensure that the hose goes neatly onto the hose reel. If you use a hand-crank winding mechanism, the trick is to do it slowly and as carefully as possible. On the other hand, if you use a spring-driven retractable mechanism, you can hold the water hose to allow it to wind slowly and correctly.

Why is correct winding important?

Proper winding of the hose helps extend the life of your hose reel. It will also make using both the water hose and the hose reel more effortless.

Conclusion

Using a hose reel and water hose is as easy as following the instructions mentioned above. Additionally, it would help if the hose is assembled and mounted correctly. The attachment of the hose to the reel is also something to look into.

LEAVE A REPLY

Please enter your comment!
Please enter your name here